Application
This narrow carbon steel bandsaw blade at fine TPI is well-suited to detailed woodwork, scrolling, and cutting thin plastic sheet where a clean kerf and good maneuverability are priorities.
Bandsaw Blade Width: 1/8"
An 1/8" bandsaw blade is one of the narrowest available, designed for tight-radius scroll work, intricate curves, and fine detail cutting where blade kerf matters. Machine wheel diameter must match — check your saw's minimum blade width before ordering this bandsaw blade width.
TPI: 24 TPI
Finest cut — very thin sheet metal, delicate brass, and thin-walled precision tube.
Keep at least 3 teeth in contact with the workpiece at all times for efficient cutting and to avoid stripping tooth tips. For thin-wall or variable-section material, variable-pitch bandsaw blades reduce harmonic vibration and extend bandsaw blade life.
Bandsaw Blade Length: 2972mm
At 2972mm, this is a large bandsaw blade typically found on heavy-duty industrial bandsaws used in timber yards, sawmills, and metal fabrication shops. If you are unsure of your bandsaw blade length, measure the existing blade end-to-end before it is looped.
If your saw requires a slightly different bandsaw blade length, enter your exact measurement in our configurator — we cut bandsaw blades to any length within our range. The loop length is always measured with the bandsaw blade ends joined as they run on the machine.
How to Order This Bandsaw Blade
Click Add to Basket above to add this exact Carbon Bandsaw Blade — 2972mm, 1/8" wide, 24 TPI — straight to your basket. Need a different bandsaw blade length or specification? Use the bandsaw blade configurator to enter your own exact measurement. We cut every bandsaw blade to order and dispatch with fast UK delivery.