Application
Fine TPI bimetal bandsaw blades in this configuration cut thin-wall metal tube, sheet, and precision aluminium extrusions cleanly, with minimal burr and good dimensional control.
Bandsaw Blade Width: 1/2"
At 1/2" wide, this is the most common general-purpose bandsaw blade width. It tracks reliably for straight ripping, resawing, and gentle curves on mid-size floor-standing machines, and is the default choice for most wood and light metal bandsaw blade work.
TPI: 14 TPI
Very fine — precision cuts on thin aluminium, mild steel sheet, and intricate plastic profiles.
Keep at least 3 teeth in contact with the workpiece at all times for efficient cutting and to avoid stripping tooth tips. For thin-wall or variable-section material, variable-pitch bandsaw blades reduce harmonic vibration and extend bandsaw blade life.
Bandsaw Blade Length: 835mm
A 835mm bandsaw blade fits compact benchtop bandsaws. These smaller machines are common in hobbyist workshops and light trade use, where work-piece size is limited but the machine is portable and cost-effective.
If your saw requires a slightly different bandsaw blade length, enter your exact measurement in our configurator — we cut bandsaw blades to any length within our range. The loop length is always measured with the bandsaw blade ends joined as they run on the machine.
Choosing an 835mm 1/2" 14 TPI bimetal blade
This bimetal bandsaw blade is 835mm long and 1/2" (about 12.7mm) wide, with a constant pitch of 14 teeth per inch. It suits small bandsaws used for repeat cutting of pipe, flat bar, angle and smaller solid stock.
With 14 TPI the teeth are spaced about 1.8mm apart, which keeps three teeth in contact from roughly 5.5mm of material upwards. A constant pitch suits batch work where the same section is cut again and again, giving a consistent finish and feed. If your sizes vary widely, a 10-14 variable pitch is more forgiving.
The high-speed steel edge of a bimetal blade keeps its sharpness in mild and stainless steel, while the flexible back takes the repeated bending of an 835mm band. The 1/2" width offers good beam strength for straight cuts.
Frequently Asked Questions
What is a constant pitch blade?
Every tooth is the same distance from the next, in this case 14 per inch. It gives a predictable cut on similar material, whereas a variable pitch mixes tooth spacings to reduce vibration.
What should I check if the blade cuts crooked?
Check the tension, the guide settings and that the blade is not blunt or missing teeth. Forcing the feed can also make a 1/2" blade deflect.
How to Order This Bandsaw Blade
Click Add to Basket above to add this exact Bimetal M42 Bandsaw Blade — 835mm, 1/2" wide, 14 TPI — straight to your basket. Need a different bandsaw blade length or specification? Use the bandsaw blade configurator to enter your own exact measurement. We cut every bandsaw blade to order and dispatch with fast UK delivery.