Application
Variable-pitch bimetal bandsaw blades in narrower widths are a popular choice for cutting metal tube, thin-wall section, and mixed bundles where vibration control is essential for blade life and operator comfort.
Bandsaw Blade Width: 1/2"
At 1/2" wide, this is the most common general-purpose bandsaw blade width. It tracks reliably for straight ripping, resawing, and gentle curves on mid-size floor-standing machines, and is the default choice for most wood and light metal bandsaw blade work.
TPI: 10–14 TPI (variable pitch)
Variable pitch — very low vibration on thin steel section, ERW tube, and sheet.
Keep at least 3 teeth in contact with the workpiece at all times for efficient cutting and to avoid stripping tooth tips. For thin-wall or variable-section material, variable-pitch bandsaw blades reduce harmonic vibration and extend bandsaw blade life.
Bandsaw Blade Length: 732mm
A 732mm bandsaw blade fits compact benchtop bandsaws. These smaller machines are common in hobbyist workshops and light trade use, where work-piece size is limited but the machine is portable and cost-effective.
If your saw requires a slightly different bandsaw blade length, enter your exact measurement in our configurator — we cut bandsaw blades to any length within our range. The loop length is always measured with the bandsaw blade ends joined as they run on the machine.
Choosing a 732mm 1/2" 10-14 TPI bimetal blade
This bimetal bandsaw blade is 732mm long and 1/2" (about 12.7mm) wide, with a 10-14 TPI variable tooth pitch. It is a good general-purpose blade for a compact bandsaw that sees a mix of solid bar, tube and profiles.
Variable pitch teeth, spaced between roughly 1.8mm and 2.5mm, reduce harmonic vibration and keep the cut smooth across changing sections. Applying the three-teeth rule, this pitch works best on material from about 6mm thick upwards. If much of your work is thin-wall tube, a 14-18 TPI blade in the same 732mm length may suit better.
The blade has a high-speed steel cutting edge welded to a flexible steel back. That combination is what makes bimetal the usual choice for metal cutting: the edge stays sharp under heat, and the back resists cracking from repeated flexing on the wheels. A 1/2" width is suited to straight cuts and only gentle curves.
Frequently Asked Questions
Can I use a blade a few millimetres longer or shorter than 732mm?
Only if it falls within your machine's tension adjustment, which is usually limited on compact machines. The safest choice is the length stated on your machine plate, manual or old blade. Our How to Measure guide shows how to check.
What metals can this bimetal blade cut?
It suits mild steel, stainless steel, aluminium, brass and copper in bar, tube and profile form, particularly medium sections.
How to Order This Bandsaw Blade
Click Add to Basket above to add this exact Bimetal M42 Bandsaw Blade — 732mm, 1/2" wide, 10/14 TPI — straight to your basket. Need a different bandsaw blade length or specification? Use the bandsaw blade configurator to enter your own exact measurement. We cut every bandsaw blade to order and dispatch with fast UK delivery.