Application
Variable-pitch bimetal bandsaw blades in narrower widths are a popular choice for cutting metal tube, thin-wall section, and mixed bundles where vibration control is essential for blade life and operator comfort.
Bandsaw Blade Width: 1/2"
At 1/2" wide, this is the most common general-purpose bandsaw blade width. It tracks reliably for straight ripping, resawing, and gentle curves on mid-size floor-standing machines, and is the default choice for most wood and light metal bandsaw blade work.
TPI: 10–14 TPI (variable pitch)
Variable pitch — very low vibration on thin steel section, ERW tube, and sheet.
Keep at least 3 teeth in contact with the workpiece at all times for efficient cutting and to avoid stripping tooth tips. For thin-wall or variable-section material, variable-pitch bandsaw blades reduce harmonic vibration and extend bandsaw blade life.
Bandsaw Blade Length: 1134mm
A 1134mm bandsaw blade fits compact benchtop bandsaws. These smaller machines are common in hobbyist workshops and light trade use, where work-piece size is limited but the machine is portable and cost-effective.
If your saw requires a slightly different bandsaw blade length, enter your exact measurement in our configurator — we cut bandsaw blades to any length within our range. The loop length is always measured with the bandsaw blade ends joined as they run on the machine.
Choosing a 1134mm 1/2" 10-14 TPI bimetal blade
This 1134mm bimetal bandsaw blade is 1/2" (about 12.7mm) wide with a 10-14 TPI variable pitch. It is a versatile metal-cutting blade for small bandsaws, covering solid stock, angle, channel and thicker-walled tube.
The tooth spacing varies between roughly 2.5mm and 1.8mm, which suits sections of around 6mm and upwards when you keep three teeth in the cut. The variable pitch reduces vibration and lets one blade handle a spread of section sizes. For thin-wall tube or sheet, a finer pitch will give a cleaner result.
Bimetal blades combine a high-speed steel cutting edge with a flexible steel back. The edge resists the heat and wear of cutting steel and stainless, and the back tolerates the bending of the band round the wheels. A 1/2" width is suited to straight cuts and gentle curves.
Frequently Asked Questions
Is 1134mm a common blade length?
It is one of the lengths used on smaller bandsaws. Always confirm the length from your machine plate, manual or old blade before ordering, as even a small difference can stop the blade tensioning correctly.
When should I replace a bimetal blade?
Replace it when it needs much more feed pressure to cut, starts to wander, or has missing or chipped teeth. Carrying on with a worn blade overloads the machine and spoils the cut.
How to Order This Bandsaw Blade
Click Add to Basket above to add this exact Bimetal M42 Bandsaw Blade — 1134mm, 1/2" wide, 10/14 TPI — straight to your basket. Need a different bandsaw blade length or specification? Use the bandsaw blade configurator to enter your own exact measurement. We cut every bandsaw blade to order and dispatch with fast UK delivery.